Brake Cleaner Aerosol

Brake Cleaner is a dynamic non chlorinated, non toxic cleaner aerosol designed to rapidly remove brake fluids, oils, dust, dirt, grease and other contaminants from brake linings, disc pads, drums, clutch plates, rotors, cylinders and springs. Stops squeal in disc brakes and can be applied without
disassembly of brakes. Gulf Western Brake Cleaner dries super fast, which enables quicker brake part changes. It also cleans other workshop equipment.

Using Brake Cleaner Aerosol

If possible lay rags or cardboard paper under the area where cleaning is to take place so as to contain residues resulting from the cleaning process and prevent them from entering drains and waterways. Shake the can well for a few seconds and apply liberally onto areas to be cleaned and allow to run off. Allow to air dry or dry by wiping the residues with a cloth. Repeat if necessary for thick deposits of contaminants to ensure complete removal.

Caution

Do not spray onto painted surfaces. If accidentally sprayed onto painted surfaces then remove immediately by washing with water. Do not allow this product to dry onto painted surface as it will lead to a streaky appearance. If this happens then polish the surface. Avoid applying onto bitumen surfaces or rubber as it is likely to soften such surfaces and render them sticky for long periods.

Usage

Under normal usage the Gulf Western Brake Cleaner will provide up to 300 spray applications per 400 gram can. Usage will also be dependent on the duration of the spray.

Pack Size

  • 400 gram aerosol